Top 30 Toy Categories to Source from China: A B2B Buyer’s Scorecard (2026)

By Marina Ma, Sales Director at Union Trust — 10+ years sourcing for Latin American and Eastern European buyers. Last updated 2026.

“Toys” is not one sourcing decision. It’s at least 30 of them, and each one carries a different minimum order quantity, a different compliance checklist, and a different margin profile. A wooden puzzle and a coding robot both sit under the same “toys” label in a supplier catalog, but the certification stack, the tooling cost, and the realistic order size for each one look nothing alike.

Most buyers pick a category based on what’s trending, blind boxes, drones, whatever a competitor just launched, without checking whether that category fits their budget, their destination market’s compliance rules, or their appetite for a customs hold. That’s how a first-time importer ends up with a container of RC trucks stuck at the port because nobody checked the battery and RF certification requirements before placing the order.

This scorecard breaks 30 toy categories into six families and scores each one on demand fit, sourcing feasibility, and compliance risk, so you can shortlist a category before you commit budget to it. It reflects 2026 market data and is written with LatAm and Eastern European import conditions in mind, since that’s where most of Union Trust’s buyers ship. For the fundamentals of the import process itself, MOQ negotiation, freight, and the five broad category groups every buyer should know, see our full B2B guide to importing toys from China. This article goes one level deeper: instead of five broad buckets, it splits the market into 30 specific sub-categories and scores each one.

Key Takeaways

• China’s toy exports concentrate heavily in a handful of regional hubs. Guangdong province alone accounts for roughly 70% of the country’s national toy exports and manufactures more than half of the toys sold worldwide, per HKTDC.
• Circana’s 2026 Global Toy Report puts 2025 global toy sales at $123 billion, up 8% year over year, with growth spread across both younger and older age groups.
• Building and construction sets are named among 2025’s outperforming toy segments (Circana), and educational toys carry a 6.5% CAGR (GMI Insights), making educational/STEM the lowest-friction entry point for new category buyers.
• Licensed merchandise made up 37% of 2025 toy sales and collectibles grew 32%, but this family carries real IP and licensing risk on top of standard factory sourcing.
• Electronic and smart toys carry the highest compliance burden of any family: battery safety, RF certification, and RoHS compliance stack on top of standard EN71/CPSIA toy safety rules.
• The scoring in this article (demand fit, sourcing feasibility, compliance risk) is editorial and criteria-based, not an algorithmic or paid ranking. Use it as a starting filter, then verify specifics with a sourcing agent before committing to MOQ.

How We Selected These 30 Toy Categories

We built this list around four criteria, and we’re disclosing them upfront because a “top 30” list is only useful if you know how it was built.

Demand growth evidence. Categories with documented growth or sustained demand (per Circana’s 2026 Global Toy Report and GMI Insights market data) scored higher on “demand fit” than categories with flat or declining interest.

China production concentration. We prioritized categories where China, and specific regional hubs within China, have a genuine manufacturing base, not categories where China is a marginal or indirect supplier. HKTDC’s regional sourcing data anchors this criterion.

Compliance complexity. Categories were scored on how many certification regimes apply (EN71 for the EU, ASTM F963 and CPSIA for the US, CE marking, RoHS for anything electronic) and how strict enforcement tends to be for that product type.

Typical MOQ and unit-economics band. Where we cite an MOQ range, it’s a typical industry range for illustration, not a confirmed quote from any specific factory. Actual MOQ varies by factory, material, and customization level. Confirm current MOQ for your specific category with your sourcing agent before budgeting.

This is a curated, criteria-based shortlist, not an objective universal ranking, a search-engine ranking, or a paid placement list. We excluded two areas from scope: adult collectibles resold on the secondary market (not a factory-sourcing decision), and single-brand licensed merchandise that requires direct license negotiation with a rights holder (out of scope for a general sourcing list, though we cover licensed-style merchandise sourced under a buyer’s own licensing arrangement in Family B).

Comparison Table: All 30 Categories at a Glance

The table below scores all 30 categories side by side. Demand Fit and Sourcing Feasibility are rated 1-5 (5 = strongest), and Compliance Risk is Low, Medium, or High relative to the toy category overall, not relative to other consumer products. MOQ ranges are typical industry ranges, not confirmed factory quotes; treat “Not publicly confirmed” cells as a flag to verify directly rather than a gap to fill in with a guess.

Educational & STEM Toy Categories

STEM and construction categories are the highest-growth, lowest-compliance-friction segment for a buyer entering a new category for the first time. Building sets are named among 2025’s outperforming toy segments, alongside licensed toys, games, collectibles, and plush (Circana’s 2026 Global Toy Report), and educational toys carry a 6.5% CAGR according to GMI Insights. Sources estimate the STEM toy market’s overall size anywhere from roughly $4 billion to $10 billion depending on the research firm’s category definition and methodology; there’s no single consensus figure, so treat any exact number you see quoted elsewhere with caution.

1. Coding & Robotics Kits

Coding and robotics kits sit at the intersection of two growth trends: STEM education demand and consumer electronics manufacturing depth. China’s Guangdong-based electronics supply chain (Shenzhen and Dongguan in particular) gives factories in this category fast access to sensors, small motors, and circuit boards, which keeps development timelines shorter than in regions without that component ecosystem nearby. Watch out: because these kits combine plastic components with electronics, they typically need both standard toy safety testing and basic electronics safety checks, so budget more testing time than for a purely mechanical toy.

2. STEM Science Experiment Kits

Science experiment kits sell well as gift-season and back-to-school items, and factories in this space are used to producing multi-component sets (vials, tools, printed instruction cards) at moderate MOQ. The main sourcing risk isn’t the toy body itself, it’s the included chemicals or reagents in some kits, which can trigger additional customs scrutiny or require separate safety documentation depending on your destination market. Confirm what’s actually included in the kit before you commit to an order, since “science kit” descriptions vary widely between suppliers.

3. Building & Construction Block Sets

Building sets are one of the best-documented growth stories in this list: Circana’s 2026 Global Toy Report names them among 2025’s outperforming segments, alongside licensed toys, games, collectibles, and plush. This is also one of the most mature manufacturing categories in China, with deep factory experience, standardized tooling, and comparatively low compliance friction since most sets use simple ABS plastic components with a long safety-testing track record. If you’re entering toy sourcing for the first time, this is one of the lower-risk categories to start with.

4. Magnetic Tile Building Sets

Magnetic tile sets ride the same construction-toy growth wave as traditional blocks, with the added draw of open-ended play that appeals to both toddlers and older kids. The compliance wrinkle here is magnet safety specifically: small, strong magnets carry documented ingestion risk, and several markets have tightened testing requirements around magnet strength and secure encasement in recent years. A standard plastic-toy compliance checklist won’t cover it. Ask your supplier for magnet-specific test reports on top of the usual EN71 paperwork.

5. Quiet Books / Soft Activity Books

Quiet books are a smaller-volume, lower-compliance-complexity category built mostly from textile and felt components rather than hard plastic or electronics, which keeps the certification list shorter. Union Trust’s own site data shows real search demand for this category (“quiet book for kids wholesale” ranks in the top handful of positions among the site’s tracked keywords), suggesting steady niche interest even without the scale of a mainstream plastic toy line. It’s a reasonable low-risk add-on category for a buyer who already sources other soft goods.

Plush, Collectible & Licensed Toy Categories

This family has the highest revenue-per-unit potential on this list, but licensing and IP risk are real buyer considerations, not just a footnote. Licensed merchandise made up 37% of 2025 toy sales, and collectibles grew 32% over the same period, per GMI Insights. Separately, Circana’s 2026 Global Toy Report found that buyers aged 15 and up now account for nearly 20% of total toy spend, more than double their share since 2020, which helps explain why collectible and designer-toy categories have grown faster than the category average.

6. Plush Toys & Stuffed Animals

Plush is one of the most established, lowest-friction categories in this entire list. Factories in Yangzhou, Jiangsu have decades of embroidery and stuffed-toy production experience, MOQ tends to run lower than hard-plastic categories, and the compliance stack is comparatively simple (flammability, fiber content, and small-parts testing for younger age grades). Watch the fabric and filling sourcing, though. Cheaper synthetic fill can fail flammability testing in some markets, and that’s a spec you want pinned down before the order goes in, while you can still change it.

7. Blind Box & Trend Toys (Designer Toys)

Blind box and designer toys carry strong demand momentum tied to the same collectibles growth (32% in 2025) driving the whole family, but sourcing feasibility is lower than plush or building sets because tooling for original vinyl figure designs takes longer and costs more upfront. Small components and detachable accessories also push this into medium compliance risk for younger-skewing product lines. If this is your first blind-box order, build extra time into your schedule for mold development. Promising a launch window to retailers before the mold is done is how this category burns first-time buyers.

8. Licensed Character Merchandise

Licensed merchandise commands premium pricing, but the buyer’s real work here happens before the factory is even chosen: securing legitimate licensing rights and verifying the factory is authorized to produce under that license. A compliant factory and a compliant product don’t protect you if the underlying license itself isn’t properly secured. Treat licensing verification as its own workstream. It’s a legal question, and standard supplier vetting doesn’t answer it.

9. Plush Keychains & Novelty Pendants

Plush keychains are a low-commitment entry point into the plush family, with lower MOQ and simpler compliance requirements than full-size stuffed animals, mainly because the smaller size shifts them toward accessory rather than core-toy safety categories in some jurisdictions. That said, small clip mechanisms and keyring hardware introduce a choking-hazard consideration for products marketed to younger children, so confirm the intended age grade before finalizing packaging and testing scope.

10. Collectible Action Figures & Mini Figures

Action figures and mini figures benefit from the same collectibles growth trend as blind boxes, with an established manufacturing base in Guangdong’s Chenghai district, long known for figure and small-toy tooling. Detachable parts and small accessories mean this category needs careful small-parts testing for any product reaching children under three, regardless of how the packaging is marketed. If your figures include weapons, tools, or other detachable accessories, factor that into your compliance testing scope from the start.

Outdoor, Seasonal & Water Toy Categories

The biggest risk in this family isn’t sourcing difficulty, it’s timing. Seasonal ordering lead time is the main operational challenge here: most buyers need to place orders 2 to 3 months ahead of peak season to account for production scheduling and shipping time, and missing that window means arriving after the retail selling season has already peaked.

11. Inflatable Pools & Swim Rings

Inflatable pools and swim rings are a reliable seasonal volume category with an established PVC-toy manufacturing base in Guangdong. Compliance risk sits at medium because PVC-based inflatables face phthalate and material-safety scrutiny in several markets, on top of standard toy safety testing. Order timing matters more than almost any other factor here: place your order early enough that a customs delay doesn’t push arrival past the local swim season.

12. Kick Scooters & Balance Bikes

Scooters and balance bikes draw on Zhejiang’s Yongkang hardware manufacturing cluster, known for metal and mechanical component production. Sourcing feasibility runs a bit lower than pure-plastic toys because these products combine metal frames, wheels, and sometimes basic mechanical assembly, which adds a quality-control step most soft-goods categories don’t need. Ask for a wheel-bearing and frame-stress test report before your first order, since this is a category where a cosmetic-only inspection can miss a real structural issue.

13. Pop-Up Kids’ Tents & Play Tents

Play tents are a comparatively simple textile-and-frame product with moderate demand and a manufacturing base that overlaps with Hebei’s Baigou textile and luggage cluster. Compliance risk sits at low to medium, driven mainly by fabric flammability standards rather than mechanical or electronic concerns. The collapsible frame mechanism is the one component worth extra quality-control attention, since a weak spring-steel frame is a common source of returns in this category.

14. Inflatable Paddleboards (SUP) for Kids

Kids’ inflatable paddleboards are a smaller, more specialized category, with Shandong’s Weihai region carrying a strong general SUP-manufacturing reputation that extends to the kids’ size range. Sourcing feasibility is moderate: fewer factories specialize in the smaller kid-specific sizing and lighter-duty materials than in the adult SUP market, so expect a shorter supplier shortlist than in more mainstream categories. Confirm buoyancy and material-safety documentation specifically for the kids’ size, since some suppliers only hold certification for their adult product line.

15. Water Guns & Splash Toys

Water guns and splash toys are a high-feasibility, low-compliance-complexity seasonal category, built from standard ABS plastic with a long manufacturing track record in Zhejiang. The main practical consideration is packaging and labeling: several markets require clear age-grade and water-capacity labeling on this product type. Check your destination market’s labeling rules while you’re still finalizing artwork. A shipment flagged at customs over a missing capacity label is an expensive way to learn this.

Electronic & Smart Toy Categories

Electronic and smart toys carry the highest compliance complexity of any family on this list, because battery safety and RF (radio frequency) certification stack on top of the standard EN71/CPSIA toy safety requirements every category has to meet. If you’re new to sourcing, treat this family as an intermediate-to-advanced category, not a starting point.

16. RC Cars & RC Trucks

RC vehicles have an established production base in Guangdong’s Chenghai district, one of the longest-running toy manufacturing clusters in China. Compliance risk is high because these products combine rechargeable battery safety, RF transmitter certification (which varies by destination country’s radio spectrum rules), and standard mechanical toy safety testing. A factory’s “CE marked” claim usually covers the toy, not the radio. Ask specifically for the radio equipment certification that applies to your destination market.

17. Drones & Model Aircraft

Drones and model aircraft benefit from Shenzhen’s position as a global consumer-drone manufacturing hub, but sourcing feasibility for new buyers is lower than most categories on this list because many destination markets are actively tightening drone import and registration rules. Compliance risk is high, and it’s a moving target: aviation-authority registration requirements for consumer drones have changed multiple times in various markets over the past few years, so verify current rules for your specific destination country before committing to inventory.

18. Interactive Smart Robots

Interactive robots combine plastic toy construction with embedded electronics, sometimes including basic AI or voice-response features, and Shenzhen’s broader electronics supply chain supports this category well. Compliance risk stays high because of the same battery and electronics certification stack as other electronic toys, plus, for any product with data-collecting features like voice recognition, potential data-privacy rules in some destination markets. Ask upfront whether the product collects or transmits any data, since that changes your compliance checklist meaningfully.

19. Kids’ Learning Tablets & Electronic Learning Toys

Learning tablets and electronic learning toys sit in the same high-compliance-risk bracket as other electronics, requiring battery, RoHS, and standard toy safety testing together. Demand is moderate rather than high on this list because this sub-category competes directly with actual consumer tablets running educational apps, which limits its growth ceiling compared to toys with no direct substitute. If margins look thin after factoring in the full compliance testing cost, that’s a signal to double-check your unit economics before committing to volume.

20. Talking / Smart Plush Toys

Talking and smart plush toys combine two categories’ compliance requirements in one product: standard plush/textile safety testing plus embedded-electronics testing for the speaker and battery module. Factories producing this hybrid product type are concentrated in Guangdong’s Dongguan area, where plush and electronics supply chains overlap. Budget for two separate rounds of safety testing rather than one, since combining the components doesn’t combine the certification requirements.

Wooden & Eco-Friendly Toy Categories

Wooden and eco-friendly toys are the fastest-growing compliance-driven segment as EU REACH chemical-safety rules continue to tighten. The EU’s REACH Substances of Very High Concern (SVHC) list has grown past 200 substances as of recent updates and is revised periodically (verify the current count on ECHA’s official candidate list before citing an exact figure), so any sustainability or “non-toxic” claim needs to be backed by current material documentation, not last year’s test report.

21. Wooden Educational Toys

Wooden educational toys draw on Zhejiang’s Yunhe county, a manufacturing cluster with a long specialization in wooden toy production. Compliance risk is low to medium, driven mainly by paint and finish chemical content rather than mechanical safety, since wood construction itself has a strong safety track record. Ask specifically for water-based, non-toxic finish documentation, since finish chemistry is where this category most often runs into trouble at EU customs.

22. Wooden Puzzles

Wooden puzzles are one of the most straightforward categories on this list: simple materials, established manufacturing, and a compliance profile limited mostly to paint safety and choke-hazard testing for smaller pieces. Sourcing feasibility is high, with Yunhe’s factory base well equipped for both standard and custom-shape puzzle designs at moderate MOQ. This is a reasonable pairing category if you’re already sourcing other wooden educational toys.

23. Biodegradable / Recycled-Material Toys

Biodegradable and recycled-material toys carry strong demand alignment with sustainability-focused retail buyers, but sourcing feasibility is lower than standard wooden toys because fewer factories have proven, certifiable biodegradable material formulations, and material consistency between production runs can vary more than with standard plastic or wood. Compliance risk sits at medium, mostly because a supplier’s word isn’t enough here. “Eco-friendly” claims need real material-composition documentation behind them to survive a retailer or customs audit.

24. Montessori Wooden Toy Sets

Montessori-style wooden sets benefit from steady demand among parents specifically seeking open-ended, non-electronic play products, and they draw on the same Yunhe manufacturing base as other wooden educational toys. Compliance complexity stays in the low-to-medium range, similar to other wooden categories, provided the finish and paint documentation is in order. This category often pairs well in a single order with wooden puzzles or push-pull toys to help hit a factory’s MOQ threshold more efficiently.

25. Eco-Friendly Wooden Push & Pull Toys

Push and pull toys are a simple, low-compliance-risk category built from wood, wheels, and a pull cord, with strong sourcing feasibility through the Yunhe cluster. The main watch-out is the pull cord itself: cord length and attachment security are specifically regulated in several markets because of strangulation risk for very young children, so confirm your supplier’s cord specifications meet your destination market’s rules rather than assuming a generic cord length is compliant everywhere.

Pretend Play, Party & Baby/Toddler Toy Categories

Infant and toddler items in this family carry more compliance weight than their simple appearance suggests, because small parts and mouthing risk push several of these categories into the “handle with care” compliance bracket even though the products themselves look straightforward.

26. Pretend Play & Role-Play Sets

Pretend-play sets, kitchens, tool sets, doctor kits, remain a stable demand category with an established manufacturing base in Guangdong’s Chenghai district. Compliance risk is medium, driven by the mix of small accessory pieces and, in some sets, basic electronic sound or light features. Verify which specific pieces in a multi-item set actually require individual small-parts testing, since regulators typically test at the piece level, not just the packaged set level.

27. Baby & Toddler Sensory Toys

Sensory toys for babies and toddlers show strong demand tied to early-childhood-development marketing trends, but compliance risk runs medium to high because these products are specifically designed for mouthing and close physical contact with infants. That means material safety testing (phthalates, heavy metals, food-grade silicone verification) needs to be more rigorous than for a general toddler toy, not less. A “BPA-free” sticker is marketing, not a test report. Ask for the actual documentation.

28. Party Favor & Novelty Toys

Party favors and small novelty toys are a high-feasibility, low-MOQ category well suited to Yiwu’s small-commodity manufacturing base, which specializes in exactly this kind of low-cost, high-SKU-count product. Compliance risk is low to medium, mostly tied to small-parts choking hazards given how small many of these items are by design. This is a practical category to add alongside a larger order to round out a product assortment without pushing your total order value up significantly.

29. Wooden/Silicone Teething & Baby Toys

Teething toys carry the highest compliance risk in this entire family because they’re designed to go directly into an infant’s mouth, which triggers the strictest material-safety testing tier of any toy category, food-grade silicone or untreated wood, no small detachable parts, and rigorous chemical testing. Sourcing feasibility is moderate: fewer factories carry genuine food-grade material certification than claim to, so factory vetting matters more here than in almost any other category on this list. This is not a category to source on price alone.

30. Dollhouses & Miniature Playsets

Dollhouses and miniature playsets round out the list as a moderate-demand, wood-based category drawing on the same Yunhe manufacturing cluster as other wooden toys. Compliance risk is low to medium, with small furniture pieces being the main small-parts consideration for younger age grades. This category often works well as a complementary line for a buyer already carrying wooden educational toys or Montessori sets, since it shares the same supplier base and finish requirements.

Sourcing Region Map: Where Each Category Is Actually Made

China’s toy manufacturing isn’t evenly spread across the country. It concentrates in a handful of regional clusters, each with a different specialty, and knowing which hub matches your category saves real time in supplier searches. Guangdong province alone accounts for roughly 70% of China’s national toy exports and manufactures more than half of the toys sold worldwide, including over half the toy supply in both the EU and US markets, according to HKTDC’s regional sourcing data.

Yiwu shows up repeatedly across the lower-MOQ, higher-SKU-count categories on this list, which makes sense given its role as a general small-commodity wholesale hub rather than a single-category manufacturing base. If you’re sourcing several of the smaller-ticket categories in this article (party favors, plush keychains, quiet books), working with a Yiwu sourcing agent familiar with that specific market can shorten your supplier search meaningfully.

Toy Safety Certifications by Category

Certification requirements are not uniform across toy categories, and treating them as one generic “toy safety” checklist is where a lot of first-time buyers get caught off guard. The matrix below shows which certification regimes typically apply to each family, with medium and high-risk cells flagging where extra scrutiny matters most.

For LatAm and Eastern European buyers specifically: destination-market requirements don’t always mirror EU or US rules exactly, and some markets are still finalizing their own toy safety frameworks or rely on a mix of EU-equivalent and locally adapted standards. Where a specific country’s requirement isn’t clearly documented in current regulatory guidance, treat it as unconfirmed and verify directly rather than assuming EU or US rules automatically transfer. This is exactly the kind of market-specific detail worth confirming with a china sourcing agent service before finalizing a compliance checklist for a new destination country.

How to Choose Your First Toy Category to Source

The right first category depends on your risk tolerance and experience level, not on whatever is trending this quarter.

If you’re new to toy sourcing, start with a low-compliance-risk category like wooden educational toys, wooden puzzles, or building block sets. These categories have mature manufacturing bases, straightforward certification requirements, and forgiving MOQ, which gives you room to learn supplier vetting and quality control without also juggling battery certification or licensing negotiations at the same time.

If you’re an experienced buyer chasing trend margin, blind box, collectible, or electronic categories offer higher revenue-per-unit potential, but budget real time and legal review for licensing verification (if applicable) and factor the full electronics compliance stack into your cost model before you quote a retail price.

If you’re running a price-sensitive volume play, classic plastic categories like building sets or water toys offer the most predictable unit economics and the most established factory base to negotiate against, which usually means more competitive quoting on your first orders.

Whichever category you land on, talk to a sourcing agent before you commit MOQ on a category you haven’t sourced before. A category that looks straightforward on paper, teething toys are a good example, can carry compliance requirements that aren’t obvious until you’re already mid-negotiation with a factory.

Frequently Asked Questions

What toy category has the lowest MOQ to start with from China?

Small-commodity categories sourced through Yiwu, party favors, plush keychains, and quiet books, tend to have the lowest per-SKU MOQ, often in the 300 to 1,000 piece range for a single design. Keep in mind that Union Trust’s platform-wide minimum order amount (MOA) is $10,000 regardless of category, so even a low per-piece MOQ category needs to add up to that total order value across your full product mix.

Do all toy categories need the same safety certification?

No. As the compliance matrix above shows, every category needs baseline toy safety testing (EN71 for the EU, ASTM F963/CPSIA for the US), but electronic toys add battery and RF certification, wooden toys add finish and chemical-content documentation under REACH, and infant-contact items like teethers require stricter material testing than general toddler toys.

Which Chinese city should I source wooden, plush, or RC toys from?

Wooden toys concentrate in Yunhe, Zhejiang. Plush toys concentrate in Yangzhou, Jiangsu. RC vehicles and other electronic/smart toys concentrate in Guangdong, specifically Shantou’s Chenghai district for RC and Shenzhen/Dongguan for more electronics-heavy products like drones and robots. See the region map above for the full breakdown.

Is importing toys from China still profitable in 2026 given rising compliance costs?

It can be, but not uniformly across every category. Global toy sales grew 8% in 2025 to $123 billion per Circana’s 2026 Global Toy Report, so overall demand is healthy. Profitability depends heavily on which category you choose: low-compliance-complexity categories like wooden toys or building sets absorb compliance costs more easily than electronic or infant-contact categories, where testing and certification can meaningfully eat into margin if you don’t budget for it upfront. There’s no blanket yes across all 30 categories in this list.

How do I verify a toy factory’s safety certifications before ordering?

Request the specific test reports relevant to your category (EN71 parts 1-3 for general toy safety, plus category-specific documentation like battery certification for electronics or REACH compliance for wooden/finished products), and confirm the report is current and matches the exact product SKU you’re ordering, not a similar product from the same factory. A sourcing agent with on-the-ground verification capability can confirm these documents match factory records before you commit payment, which is harder to do reliably from overseas on your own.

Conclusion

Thirty categories, six families, one shared lesson: the toy you pick to source matters as much as the factory you pick to source it from. Building sets and wooden toys offer the gentlest on-ramp for a new buyer. Electronic and infant-contact categories carry real compliance weight that needs to be priced into your unit economics from day one, not discovered after a shipment gets held at customs. Licensed and collectible categories offer strong margin but come with IP and licensing homework that has nothing to do with factory quality.

Use the scorecard above as a starting filter, not a final decision. Not sure which category fits your specific market and risk tolerance? Our sourcing team can shortlist verified factories by category and match them against your destination market’s compliance requirements before you commit budget. Talk to our sourcing team about your shortlist, or start with the fundamentals in our full B2B guide to importing toys from China if you’re still working out your overall import process. If your product line also includes pet toys alongside kids’ toys, our guide to wholesale dog toys from China covers that adjacent category in more depth.